1 5

Whiteline

Front Strut Rod - To Chassis Bushing Kit to Suit Nissan Navara D21 and Pathfinder WD21

Front Strut Rod - To Chassis Bushing Kit to Suit Nissan Navara D21 and Pathfinder WD21

$97.06 NZD
$97.06 NZD $97.06 NZD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Size (LxWxH)

Front Strut Rod - To Chassis Bushing Kit to Suit Nissan Navara D21 and Pathfinder WD21

Details:

Foot Note 3: Limited Lifetime Warranty

Sub Brand: Replacement

Components Per: 4 Bushings, 2 Tubes, 4 Washers

Fitting Position: Rear

Wheel Alignment: Yes

Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.

Installation time: 2 Hours

Kit Contents: 4 Bushings, 2 Tubes, 4 Washers

Descriptions:


Benefit Note:

Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle. Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.
    Vehicle Types;
    • Make/Model: FORD MAVERICK, Chassis Group: 1993-1998 | MAVERICK UDS, UNS, Important Note: Crush tube 62mm L
    • Make/Model: HOLDEN JACKAROO, Chassis Group: 1985-1992 | JACKAROO UBS I USB16, UBS17, UBS55
    • Make/Model: HOLDEN RODEO, Chassis Group: 1988-2003 | RODEO TFR 2WD
    • Make/Model: ISUZU TROOPER, Chassis Group: 1984-1991 | TROOPER UBS I
    • Make/Model: KIA CARNIVAL, Chassis Group: 1999-2006 | CARNIVAL UP, GQ
    • Make/Model: NISSAN CABSTAR, Chassis Group: 1982-1992 | CABSTAR F22
    • Make/Model: NISSAN CABSTAR, Chassis Group: 1992-2000 | CABSTAR F23, H42
    • Make/Model: NISSAN DATSUN, Chassis Group: 1985-1997 | DATSUN D21 2WD, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN DATSUN, Chassis Group: 1985-1997 | DATSUN D21 4WD, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN DATSUN 280C, Chassis Group: 1977-1984 | DATSUN 280C P330, P430, Important Note: Suits P430 models
    • Make/Model: NISSAN HOMY, Chassis Group: 1982-1992 | HOMY E23, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN HOMY, Chassis Group: 1987-2010 | HOMY E24
    • Make/Model: NISSAN LAUREL, Chassis Group: 1981-1985 | LAUREL C31
    • Make/Model: NISSAN NAVARA, Chassis Group: 1985-1998 | NAVARA D21 2WD, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN NAVARA, Chassis Group: 1986-1998 | NAVARA D21 4WD, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN NAVARA, Chassis Group: 1997-2015 | NAVARA D22 2WD, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN PATHFINDER, Chassis Group: 1986-1995 | PATHFINDER WD21, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN TERRANO, Chassis Group: 1986-1996 | TERRANO WD21, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN TERRANO II, Chassis Group: 1992-2007 | TERRANO II R20, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN URVAN, Chassis Group: 1980-1986 | URVAN E23, Important Note: Crush tube 62mm L
    • Make/Model: NISSAN URVAN, Chassis Group: 1987-2010 | URVAN E24
    • Make/Model: NISSAN UTE, Chassis Group: 1980-1986 | UTE 720 4WD, Important Note: Crush tube 62mm L
    • Make/Model: TOYOTA DYNA, Chassis Group: 1985-1995 | DYNA LH81, YH81
    • Make/Model: TOYOTA DYNA 100, Chassis Group: 1985-1995 | DYNA LH81, YH81
    • Make/Model: TOYOTA HIACE, Chassis Group: 1982-1989 | HIACE H50, 60, 70 SERIES, Important Note: 17mm ID
    View full details

    Track Proven Suspension

    As used by many D1NZ Drivers in New Zealand

    Quality Assured

    Our Coillovers & Air Suspension Kits have a 2 Year Warranty!
    We stand by what we sell.

    Compliance

    Rest assured, our coilovers are built to the highest manufacturing standards. We provide all the necessary paper work to assist with your certification process.

    Click Here to view

    Reviews

    • BADEJ - BAGGED SUBARU

      "Extremely pleased with the TSD Air Suspension kit. It’s a competitively priced kit that myself and others have found it works surprisingly well on track"

    • Coilover Suspension - Subaru

      "I've owned the TSD coilovers for a few years now and they have held up great. Love the adjustability of the ride height, camber and dampening. Overall the quality is amazing. Went through the certification process easily. a great product"

    • Air Suspension - Rolls Royce

      I utalised a TSD Tesla Kit, Made my own modifications & fitted the air management, install was a breeze.

    Button label