Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV
Details:
Foot Note 2: Adds +/-1.5deg camber
Foot Note 3: Limited Lifetime Warranty
Sub Brand: Replacement
Components Per: 8 Bushings, 4 Tubes
Fitting Position: outer
Wheel Alignment: Yes
Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.
Installation time: 3 Hours
Kit Contents: 8 Bushings, 4 Tubes
Descriptions:
Benefit Note:
Providing +/- 1.5deg camber adjustment (on car), Whiteline's kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. Providing +/- 1.5deg camber adjustment (on car), WHITELINE'S kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.
Vehicle Types;
Make/Model: CHEVROLET CAMARO, Chassis Group: 2009-2015 | CAMARO 5TH GEN, Important Note: Performance Alignment - adds +/- 1.5deg camber - replaces both control arm outer and trailing arm rear bushing
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE INTERCEPTOR RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VC RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VH RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VK RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VL RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN CALAIS, Chassis Group: 2006-2013 | CALAIS VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN CAPRICE, Chassis Group: 2006-2013 | CAPRICE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN COMMODORE, Chassis Group: 2006-2013 | COMMODORE VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN STATESMAN, Chassis Group: 2006-2010 | STATESMAN WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV CLUBSPORT, Chassis Group: 2006-2013 | CLUBSPORT E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV GRANGE, Chassis Group: 2007-2013 | GRANGE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV GTS, Chassis Group: 2006-2013 | GTS E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV MALOO, Chassis Group: 2007-2013 | MALOO E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV SENATOR, Chassis Group: 2006-2013 | SENATOR E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV W427, Chassis Group: 2008-2013 | W427 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: VAUXHALL VXR8, Chassis Group: 2007-2013 | VXR8 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Our Coillovers & Air Suspension Kits have a 2 Year Warranty! We stand by what we sell.
Compliance
Rest assured, our coilovers are built to the highest manufacturing standards. We provide all the necessary paper work to assist with your certification process.
"Extremely pleased with the TSD Air Suspension kit. It’s a competitively priced kit that myself and others have found it works surprisingly well on track"
Coilover Suspension - Subaru
"I've owned the TSD coilovers for a few years now and they have held up great. Love the adjustability of the ride height, camber and dampening. Overall the quality is amazing. Went through the certification process easily. a great product"
Air Suspension - Rolls Royce
I utalised a TSD Tesla Kit, Made my own modifications & fitted the air management, install was a breeze.
